WhatsApp: +86 139 2872 8741
Email: [email protected]
Tel:
0086-757-8938 9313
0086-20-8938 9313
Address:
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Reply within 1 hour, 24x7 online service
WhatsApp: +86 139 2872 8741
Email: [email protected]
Tel:
0086-757-8938 9313
0086-20-8938 9313
Address:
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Reply within 1 hour, 24x7 online service
EL Masks in one sentence: An EL mask has a glowing panel built into the face shell, so the mask reads in complete darkness.
Standard masks disappear in low light. A lit mask is visible across a dark room and photographs without extra lighting.
| Quick facts | What you get |
|---|---|
| Shell | Moulded mask with bonded EL panel |
| Battery | Rear-mounted pack |
| Vision | Eye openings sized for safe forward vision |
| Care | Spot clean only |
| Minimum order | Low MOQ accepted; most custom builds from 5 pcs |
| Sampling | Digital mockup, then physical sample for written approval |
| Shipping | Export cartons; express, air or sea freight |
| Certification | CE, FCC and RoHS on the models that carry them; numbers on request |


A shaped EL panel is bonded inside the mask shell, wired to a battery pack worn behind the head.
| Parameter | Typical specification |
|---|---|
| Shell | Moulded mask with bonded EL panel |
| Battery | Rear-mounted pack |
| Vision | Eye openings sized for safe forward vision |
| Care | Spot clean only |
| Feature | Advantage (what it is) | Benefit (what it does for you) |
|---|---|---|
| Factory-direct production | Printed, laminated and wired in our Foshan facility | A spec change reaches the line the same day, not a week later |
| Thin and flexible build | Moulded mask with bonded EL panel | Fits curved surfaces and shallow frames that a light box cannot |
| Even illumination | Flat sheet light source, no LED hot spots | Your artwork looks the same edge to edge, which protects brand quality |
| Low power draw | Roughly 0.5-2 W per 100 cm2 | Battery operation becomes practical for shelf and event pieces |
| Zone animation | 2-8 lit zones in a fixed sequence | Motion pulls the eye without adding a screen or a player |
| Replaceable print layer | Same panel and driver, new printed layer | Repeat campaigns cost less than the first build |
Low MOQ accepted. Custom face shapes need a mould, which is quoted separately.
EL is a low-brightness, flat light source. If your site faces direct sunlight all day, if the message must be readable from 30 metres, or if you need full video motion, EL will disappoint you and we will say so before you pay. In those cases we recommend a backlit or LED alternative instead of taking an order that ends in a complaint.
1. Direct factory source, better quality control. Panels are printed, laminated and wired in our Foshan facility. No trading layer between you and the line, so a spec change reaches the operator the same day instead of a week later.
2. 15+ years professional & expert experience. We have been producing electroluminescent displays since the early 2000s for beverage, FMCG and event clients. That history is why we can tell you in the first call whether your idea will print cleanly.
3. Smooth communication & fast response. One named contact handles your order from quote to shipping. We reply within 1 hour, 24×7, and we answer in writing so nothing depends on a phone call you cannot forward to your team.
4. Small qty acceptable. Most custom EL products start from 5 pcs. You can test a market, a single store or one event before committing to a production run.
5. Cooperated with more than 100+ global brands. Work from beverage, cosmetics, telecom and retail clients across Europe, the Middle East and the Americas has taught us the artwork and compliance quirks of each market.
6. Stable lead time & fast delivery. Production slots are booked when your deposit lands, and the sampling and bulk dates are confirmed in writing. If a deadline is unrealistic we say so before you pay, not after.
Eye openings are sized for forward vision. We do not recommend masks for activities where peripheral vision matters.
There are vent openings, but it is a costume piece rather than a safety mask.
Send your artwork or a rough sketch. We will confirm feasibility, MOQ and lead time in writing, usually within 1 hour.
Reply within 1 hour, 24×7 online service · [email protected]
Tell us the product, size, quantity and destination country. Attach artwork if you have it.