WhatsApp: +86 139 2872 8741
Email: [email protected]
Tel:
0086-757-8938 9313
0086-20-8938 9313
Address:
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Reply within 1 hour, 24x7 online service
WhatsApp: +86 139 2872 8741
Email: [email protected]
Tel:
0086-757-8938 9313
0086-20-8938 9313
Address:
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Reply within 1 hour, 24x7 online service
The problem in one line: a printed tent card sits ten centimetres from the guest, yet in a dim dining room most guests never look at it twice. An EL table card fixes that by making the card itself the light source.
We manufacture electroluminescent panels in Foshan, and restaurant groups ask us the same question every quarter: how do we run a sampling campaign that guests actually notice between courses? This guide answers with numbers. It covers card formats, power routes, the single-use versus swappable decision, and a six-step campaign plan. If your venue also runs a bar counter, the bar menu board guide covers the larger formats behind the counter.
| Item | Typical figure or rule |
|---|---|
| What it is | A 0.3-0.5 mm electroluminescent sheet printed with your graphic and powered by a small inverter |
| Card formats | About 102 x 152 mm for two-top tables; 127 x 178 mm for full dining tables and bar tops |
| Panel brightness | 80-140 nits; fresh panels start at about 140 nits and fade gradually |
| Reading distance | One to two metres, which is the natural gap between seated guest and card |
| Power routes | Two-cell battery box, USB power bank, or a concealed 12V/AC route for fixed installs |
| Typical runtime | A battery pack covers a dinner service; exact hours confirmed per panel size and drive setting |
| Animation | 2-4 lit zones per card; sequencing is set in the animation map before sampling |
| Reusability | Frame-style cards swap printed faces and stay in service across 3-5 campaigns |
| Trial order | Low MOQ accepted, wholesale from 5+ pcs per design |
| Lead times | Sample within 7 days of mockup approval; bulk 7-10 days; large roll-outs 15-20 days |
An EL table card is a tent-shaped or flat card whose face is an electroluminescent laminate instead of plain card stock. The stack is thin: your printed graphic film on top, then the glowing phosphor layer, then a backing layer, all sealed against handling. The total build measures 0.3-0.5 mm, so the card still folds, stands and wipes clean like the printed version it replaces.
A small inverter converts battery or USB input into the alternating field the panel needs. Nothing on the card heats up in normal use, so the card stays safe next to napkins, menus and small hands. The glow is a flat, even field rather than a row of bulbs, which is why the graphic reads as a lit print instead of a gadget.
Two build styles matter for campaign planning. The sealed build glues the graphic and panel into one card that serves one campaign and retires with it. The frame build keeps the panel and driver in a rigid holder and lets the printed face slide out, so a new campaign costs a reprint instead of a new unit. We break down that choice in the comparison below.
A sampling campaign asks a guest to try one drink, one dessert or one new dish. Wall posters and window decals fight for attention from metres away. The table card has a position no other medium holds: it stands inside the guests line of sight for the whole meal, and every person at the table passes it when they reach for the salt or the menu.
Three rules from venue campaigns keep the card working. First, one or two messages per card outperform crowded layouts, because a guest reads it in a two-second glance. Second, the offer must be claimable on the spot: a QR code that opens a sample voucher or a loyalty sign-up converts far better than a slogan alone. Third, the card must look alive in the rooms light, which is exactly where printed cards fail after sunset and where an EL face keeps working.
The glow is not decoration for its own sake. In a restaurant the light level drops from roughly 200-300 lux in the dining room to well under 100 lux over many bar and lounge zones. A printed card loses contrast as the room dims. An EL face holds its contrast because it carries its own light, so the same campaign graphic works at lunch and at ten in the evening.
1. The panel glows on its own. The phosphor layer emits light across the whole printed area, so there are no dark corners and no hotspot behind the logo. Fresh panels start around 140 nits, which reads clearly at one to two metres without lighting the tablecloth.
2. The inverter fits inside the base. Card-sized inverters sit in the fold or the base of the stand. They are silent or near-silent, and they produce almost no heat, so the card stays comfortable to handle during service.
3. Power follows the campaign length. A two-cell battery box suits a single evening activation. A USB power bank suits a weekend festival or a multi-day trial. For permanent table fixtures, a concealed 12V route keeps the card always on without staff handling batteries.
4. Zones animate the offer. A card can carry 2-4 lit zones that alternate, so the drink name pulses while the price line holds steady. The sequence is fixed in an animation map that you approve before sampling, so what reaches the table matches the storyboard.
| Zone | Fit |
|---|---|
| Zone | Why an EL card fits |
| Two-top cafe tables | 102 x 152 mm cards push the dessert or seasonal drink at close range |
| Full dining tables | 127 x 178 mm cards carry one offer plus a QR line without crowding the setting |
| Bar tops and lounges | Under 100 lux ambient, the glow keeps the offer readable after sunset |
| Host stands and wait stations | The same panel face doubles as a daily special board for walk-in guests |
| Tasting and sampling events | Battery cards place the trial offer on every sample table without wiring |
This is the decision that decides whether the campaign budget buys one evening or a year of evenings. A sealed single-campaign card is cheapest per unit and simplest to hand out, but it retires when the campaign ends. A frame-style card with a replaceable printed face costs more up front, then each new campaign costs only a face reprint, and the panel and driver stay in service across 3-5 campaigns.
| Question to ask | Sealed card | Frame card |
|---|---|---|
| Question to ask | Sealed single-campaign card | Frame card with replaceable face |
| Best for | One launch, one weekend, one venue | Quarterly launches, agency roll-outs, seasonal menus |
| Graphic change | New build for every campaign | Slide out the face, reprint, slide back in |
| Panel reuse | None | Panel and driver reused across 3-5 campaigns |
| Handling | Light enough to hand out or mail | Rigid holder wipes clean and survives daily service |
| Storage between runs | Flat box, away from sharp folds | Same, plus the base stays with the table kit |
An EL table card earns its place in three situations: the room dims during service, the campaign runs on a fixed table position for weeks, and the brand wants the offer to register as a moment rather than a flyer. It disappoints in three others, and saying so early is part of our job.
| Situation | Verdict | Why |
|---|---|---|
| Situation | Verdict | Why |
| Dim dining rooms, bars, lounges | WORTH IT | Own light holds contrast where print fades |
| Multi-week fixed placements | WORTH IT | Swappable faces amortise the panel across campaigns |
| Sampling events with no wiring | WORTH IT | Battery cards place a lit offer anywhere on a table |
| Bright daytime patios | SKIP IT | 80-140 nits cannot beat daylight; print or shade the table |
| Video-length content at the table | SKIP IT | 2-4 zones animate, but screens belong to LED or LCD |
| Outdoor sidewalks in weather | SKIP IT | Cards are indoor fixtures; sealed outdoor work needs a different build |
1. Pick the offer and keep it single. One drink, one dessert, one trial. The card carries the offer name, a one-line reason to try it, and a QR line. Everything else waits for the next campaign.
2. Choose the build for the calendar. One weekend or one venue: sealed cards. Quarterly or multi-venue: frame cards with replaceable faces, so each quarter costs a reprint instead of a new unit.
3. Send layered artwork. Vector AI or PDF files with the lit zones on separate layers, plus an animation map that says which zone lights and in what order. Our artwork file guide shows the exact layer names we need.
4. Approve the mockup, then the lit sample. We return a mockup for layout, then produce a lit sample within 7 days of approval. Check the glow against your real room light, not against a screen, before signing the sample.
5. Size the power for the service pattern. Tell us the hours the card runs each day and whether staff can swap or recharge packs. We size batteries against panel area and drive setting and confirm runtime in writing.
6. Measure claim rate, then scale. Count QR scans or voucher claims per table per evening. Scale the winning design to the full floor or the next venue, and reuse the frame cards with a fresh face.
Crowding the face. A lit face invites more text, and crowded text kills the two-second read. Keep one offer and one action per card.
Designing against a screen instead of the room. A card that pops on a monitor can wash out over a white tablecloth or vanish against dark wood. Test the lit sample at table height in the real room.
Ignoring the fold. The panel bends to a radius of about 5-10 mm before the electrodes risk damage. A sharp crease across a live zone kills that zone, so the fold line must sit in the dead margin we specify.
Forgetting the claim path. A glowing offer without a claim method measures nothing. Put the QR line inside the lit zone so it stays readable at night.
Ordering one card for every table type. A 102 x 152 mm card drowns on a large dining table, and a 127 x 178 mm card overhangs a two-top. Map card size to table size before quoting.
| Feature | Advantage | Benefit |
|---|---|---|
| Feature | Advantage | Benefit for the campaign |
| 0.3-0.5 mm laminated EL face | Folds and stands like normal card stock | No new table rituals for staff or guests |
| 80-140 nits even glow | Readable at 1-2 m under 100 lux | Offer stays visible through the whole evening service |
| 2-4 animated zones | The offer pulses while the price line holds | Guests notice the card between courses |
| Battery or USB power | No table wiring and no venue permits | Cards move to any table the same afternoon |
| Replaceable printed faces | Panel reused across 3-5 campaigns | Each new launch costs a reprint, not a rebuild |
| Factory direct from Foshan | Spec changes reach the line the same day | Campaign fixes land before the weekend |
1. Direct factory source better control quality. Panels are printed, laminated and wired in our Foshan facility. No trading layer sits between you and the line, so a spec change reaches the operator the same day.
2. 15+ years professional experience. We have produced electroluminescent displays since the early 2000s for beverage, FMCG and event clients. That history tells you early whether your card idea will print cleanly.
3. Smooth communication & fast response. One named contact handles your order from quote to shipping. We reply within 1 hour, 24×7, and we answer in writing so your team can forward the details.
4. Small qty acceptable. Custom EL products start from 5 pcs. You can test one venue, one city or a single campaign before committing to a production run.
5. Cooperated with more than 100+ global brands. Work for beverage, cosmetics, telecom and retail clients across Europe, the Middle East and the Americas taught us the artwork and compliance habits of each market.
6. Stable lead time & fast delivery. Production slots are booked when your deposit lands. Sampling and bulk dates are confirmed in writing, and we flag an unrealistic deadline before you pay.
A sampling campaign succeeds when the offer survives the rooms light and reaches every guest at the table. An EL table card does that with a 0.3-0.5 mm laminated face that glows evenly at 80-140 nits, runs from a battery pack the size of the base, and swaps printed faces between campaigns. Send us the offer, the table sizes and the service hours through our contact page, and we will return a format recommendation, a power plan and a sample schedule within the hour.
Send the size, quantity and destination country. We reply within 1 hour with feasibility, MOQ and lead time in writing.
Reply within 1 hour, 24×7 online service · [email protected]
Tell us the product, size, quantity and destination country. Attach artwork if you have it.