WhatsApp: +86 139 2872 8741
Email: [email protected]
Tel:
0086-757-8938 9313
0086-20-8938 9313
Address:
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Reply within 1 hour, 24x7 online service
WhatsApp: +86 139 2872 8741
Email: [email protected]
Tel:
0086-757-8938 9313
0086-20-8938 9313
Address:
Caochang Industrial Area, Liguang Rd, Lishui, Nanhai, Foshan, Guangdong, China
Reply within 1 hour, 24x7 online service
The problem in one line: a hotel wants its brand moments to glow after dark, yet the lighting budget forbids glare, heat and visible fixtures in a finished interior. An EL poster answers with a flat glow that needs none of those.
We manufacture electroluminescent posters in Foshan, and hospitality design teams ask one question first: will it look like architecture or like a shop fitting? This guide answers with numbers. It covers how an EL poster behaves in a lobby bar that runs at 50-100 lux, where each format belongs across the property, and the honest comparison with neon and LED strip. For the night-end of the same business, the nightclub guide covers louder rooms.
| Item | Typical figure or rule |
|---|---|
| What it is | A printed graphic laminated onto a 0.3-0.5 mm electroluminescent panel with a hidden driver |
| Panel brightness | 80-140 nits; fresh panels start at about 140 nits and fade gradually |
| Hospitality ambient light | Bars and lounge zones typically 50-100 lux after dark; lobbies warmer and lower than offices |
| Colour tone pairing | Warm-white interiors at 2200-3000 K; the aqua-white EL glow sits beside them without clashing |
| Reading distance | Two to six metres for wall posters; feature walls read further |
| Power routes | Concealed 12V/AC for permanent walls; battery or USB for campaign walls |
| Animation | 2-8 lit zones on A2+ feature walls, sequenced per the approved animation map |
| Lifespan | 8,000-25,000 hours to half brightness under typical drive settings |
| Trial order | Low MOQ accepted, wholesale from 5+ pcs per design |
| Lead times | Sample within 7 days of mockup approval; bulk 7-10 days; roll-outs 15-20 days |
An EL poster is a printed graphic that carries its own light. The electroluminescent layer measures 0.3-0.5 mm, so the piece hangs like a framed print rather than a fixture. There are no bulbs behind it, no heat signature for guests to feel, and no visible cabling if the inverter is concealed in the mount.
The glow itself is the aesthetic argument. Interiors run layered: soft ambient light from coves and pendants, then accents on bar tops and brand moments. An EL poster belongs in the accent layer. It lifts one graphic off the wall at 80-140 nits, which is bright enough to read in a 50-100 lux bar and gentle enough not to spill onto the table service beside it.
Because the light is a flat field, the graphic keeps the character of a print. Guests see a glowing artwork, not a light box with visible edges or a screen competing with the room. That is the line between hospitality styling and retail signage, and it is the reason design teams specify EL for brand walls and printed canvas for everything else.
Lighting guides for hospitality converge on the same numbers. Bars sit in the 2200-2700 K warm band, with ambient levels around 50-100 lux and accent pools on the counter and bottle shelves. Lobbies aim near 3000 K for a welcoming tone, with brighter pools at the registration desk. Every layer above ambient is deliberate, and every layer that glares gets dimmed out.
An EL poster fits that discipline. Its 80-140 nit field behaves like a backlit print at close range: it wins contrast over the wall behind it without flooding the zone. In a bar under 100 lux, the glowing face reads at two to six metres. In a lobby corridor it guides the eye to the lift bank or the lounge entrance without becoming the brightest thing in the room.
There is also the service argument. Faces wipe clean, the panel stays cold to the touch, and the driver draws about as much power as a phone charger. A property can leave brand walls lit through the evening without a heat or energy conversation.
1. It holds contrast as the room dims. Printed canvas loses contrast when ambient light falls; the EL face keeps its own, so the graphic that welcomed guests at dinner still reads at midnight.
2. It stays inside the accent layer. At 80-140 nits the panel reads as a deliberate glow, not as lighting. Specifiers place it exactly where they would place a spot on a canvas, minus the spot.
3. It animates without becoming a screen. Two to eight lit zones can sequence across the graphic: a skyline that lights window by window, a brand mark that traces once every few seconds. The movement is slow and graphic, so the wall stays furniture, not media.
4. It mounts like a print. The panel bends to a radius of about 5-10 mm and mounts under a frame, on standoffs or flush with tape against sealed surfaces. Installation on a finished wall takes minutes per panel, not an electrician visit.
| Zone | Format |
|---|---|
| Zone | Format and why |
| Lobby feature wall | A2-A1 EL poster or multi-panel array; 4-8 zones for a slow brand moment |
| Bar back wall | A2 panels above the bottle shelf; the glow frames the brand without glare into seating |
| Lift lobbies and corridors | A3-A2 posters mark the lounge, spa or restaurant with a lit cue at each junction |
| Spa and wellness zones | Single-zone soft glow; the low drive setting suits quiet rooms |
| Event and campaign walls | Battery-powered panels on temporary walls; no chasing masonry, no permits |
Buyers usually arrive with one of three alternatives in mind. Each does a different job, and the honest comparison below is how we steer the choice on a first call.
| Question to ask | EL poster | Neon | LED strip | Canvas |
|---|---|---|---|---|
| Question to ask | EL poster | Neon | LED strip / light box | Printed canvas |
| Light quality | Flat even sheet glow | Bright tube lines | Point or edge light | None |
| Reads at 50-100 lux | Yes, 2-6 m | Yes, further | Yes | No, fades with the room |
| Glare at close seating | Low | High near the tubes | Medium on edges | None |
| Heat at the wall | Almost none | Warm to touch | Driver heat inside the frame | None |
| Thickness on a finished wall | 0.3-0.5 mm plus mount | Tube and mounts | Frame depth 20-60 mm | Frame only |
| Animation | 2-8 graphic zones | Flicker and flasher units | Programmable scenes | None |
| Indoor campaign portability | Battery routes available | Fixed install | Usually wired | Yes |
EL earns its place when the brand moment lives indoors, under dimmed light, at reading distance. It loses to other technologies when the job needs throw, daylight punch or video. We say that on the first call, because a wall that underperforms reflects on the whole project.
| Situation | Verdict | Why |
|---|---|---|
| Situation | Verdict | Why |
| Bar back wall under 100 lux | WORTH IT | Own light holds contrast without glare into seating |
| Lobby brand wall with slow animation | WORTH IT | 2-8 zones animate like a print, not a screen |
| Evening-only campaign walls | WORTH IT | Battery routes mount without chasing the wall |
| Daylit atriums and facades | SKIP IT | 80-140 nits cannot compete with daylight; use LED |
| Wayfinding that must meet exit-sign rules | SKIP IT | EL is not a certified safety sign; keep compliance signs as specified |
| Video content zones | SKIP IT | That job belongs to LED or LCD screens |
1. Walk the property at night. Photograph each candidate wall under real evening light. If the zone reads above roughly 150 lux from daylight spill or uplighting, plan a different technology there.
2. Assign one job per wall. Brand moment, zone cue or campaign face. A wall with one job gets one clean graphic; a wall with three jobs gets three positions.
3. Send layered vector artwork. AI or PDF with lit zones on separate layers plus an animation map. The artwork file guide lists layer names and the 5-8 mm dead margin we need at the edges.
4. Match power to the wall condition. Finished masonry and heritage walls take battery or USB routes; service corridors and new joinery take a concealed 12V line. We size inverter and driver against panel area and confirm the plan in writing.
5. Approve mockup, then lit sample in the room. The sample ships within 7 days of mockup approval. Hold it on the actual wall at night before signing production.
6. Stage the roll-out by property. Lock the approved sample, then schedule per site at 15-20 days for bulk, with per-site packaging and install notes so each property hangs the same wall the same way.
Specifying by daylight impressions. A wall that looks crowded at noon may be the best canvas at night. Judge EL positions under evening light, which is when they work.
Putting the glow next to task light. An EL face beside a bright reading lamp or registration screen loses its contrast advantage. Give it a wall segment of its own.
Cutting zones too small. The dead margin around each lit zone runs 5-8 mm, so tiny letters as separate zones bleed together. Keep zone text to display sizes and put small legal lines in the printed non-lit layer.
Forgetting the driver bay. Every panel needs a concealed pocket for the inverter. Mark it on the joinery drawing before production, not during install.
Treating panels as wash-down fittings. The laminate handles steam and fingerprints from normal service, not jets or standing water. Bar backsplashes behind the glass wash line need a different build.
| Feature | Advantage | Benefit |
|---|---|---|
| Feature | Advantage | Benefit for the property |
| 0.3-0.5 mm laminated panel | Hangs like a framed print on finished walls | No visible fixtures in interior photography |
| 80-140 nits flat glow | Reads at 2-6 m under 50-100 lux | Brand moments stay visible through evening service |
| Almost zero heat and low draw | Safe beside fabrics, seats and bottles | Walls stay lit all evening without an energy case |
| 2-8 animated zones | Slow graphic movement, storyboarded | Feature walls feel designed, not electronic |
| Battery or concealed 12V routes | Mounts on finished or temporary walls | Campaign walls install without building work |
| Factory direct from Foshan | Colour revisions reach the line the same day | Property roll-outs keep the same glow everywhere |
1. Direct factory source better control quality. Panels are printed, laminated and wired in our Foshan facility. No trading layer sits between you and the line, so a colour revision reaches the operator the same day.
2. 15+ years professional experience. We have produced electroluminescent displays since the early 2000s for hospitality, beverage and event clients. That history tells you early whether your wall idea will print cleanly.
3. Smooth communication & fast response. One named contact handles your order from quote to shipping. We reply within 1 hour, 24×7, and we answer in writing so your design team can act on the details.
4. Small qty acceptable. Custom EL products start from 5 pcs. You can trial one lift lobby or one bar wall before extending the design across the property.
5. Cooperated with more than 100+ global brands. Work for beverage, cosmetics, telecom and retail clients across Europe, the Middle East and the Americas taught us the artwork and compliance habits of each market.
6. Stable lead time & fast delivery. Production slots are booked when your deposit lands. Sampling and bulk dates are confirmed in writing, and we flag an unrealistic opening date before you pay.
A lobby or bar buys atmosphere first and signage second. An EL poster serves both: a 0.3-0.5 mm printed face that glows evenly at 80-140 nits, holds its contrast in a 50-100 lux evening room, animates like a print instead of a screen, and mounts without building work. Send us the wall dimensions, the evening light level and the artwork through our contact page, and we will return a format plan, a power route and a sample schedule within the hour.
Send the size, quantity and destination country. We reply within 1 hour with feasibility, MOQ and lead time in writing.
Reply within 1 hour, 24×7 online service · [email protected]
Tell us the product, size, quantity and destination country. Attach artwork if you have it.